Water Cooler Cleaning
Keep Your Water Cooler Fresh and Clean
We recommend having your water cooler cleaned and sanitized once a year. Over time, mineral scale and residue can build up inside the reservoir and faucets, and an annual cleaning keeps your drinking water tasting fresh and your cooler running the way it should.
How Our Cooler Cleaning Works
- If you own your cooler: we drop off a clean loaner cooler, take yours back to our facility for a full cleaning and sanitization, and return it to you the following week. The service is a flat $50.
- If you rent your cooler from DrinkMore: we swap it out for a freshly cleaned cooler for a flat $50.
Tell us about your cooler below and our team will get your cleaning scheduled.
"*" indicates required fields
Prefer to Clean Your Cooler Yourself?
You can also clean and sanitize your cooler at home between services. The full manufacturer service manual is available here: Aspen Water Cooler Service Manual (PDF).
Please read these safety notes first. Always turn off the hot tank switch and unplug the cooler before you start. On hot and cold models, allow the hot tank about two hours to cool before draining it. Never immerse the cooler in water or use a pressure washer, and use only mild dish soap (never bleach or abrasive cleaners) on the outside surfaces.
How to Sanitize Your Cooler
- Turn off the hot tank power switch and unplug the cooler.
- Remove the water bottle and drain the water out through the faucets. On hot and cold models, allow two hours for the hot water to cool, then remove the drain plug at the rear and drain the tank (about 0.4 gallon, or 1.8 liters).
- Remove the no-spill device.
- Pull the baffle straight up to remove it and set it aside.
- Mix one and a half tablespoons of white vinegar into one gallon (4.5 liters) of clean water and pour it into the reservoir. Wipe the inside of the reservoir, the baffle and the faucets with a clean cloth, then let the solution stand for five minutes.
- Clear dust and debris from the condenser at the back using a vacuum brush attachment, or a stiff non-metallic brush and a damp cloth. Do not use a pressure washer or spray it directly with water.
- Rinse the baffle and both faucets thoroughly with clean water several times.
- Reinstall the baffle, faucet, no-spill device, silicone plug and drain cap.
- Put a fresh bottle on the cooler. Before plugging it back in, vent the hot tank by holding the hot faucet open until water flows out.
- Draw one cup of water from each faucet and pour it out.
- Plug the cooler back in and turn the hot tank switch on. Wait 30 minutes before drawing water. The cooler reaches its ideal hot and cold temperatures after one to two hours.
Routine Care Between Cleanings
The manufacturer recommends sanitizing on a schedule that fits how and where your cooler is used. This simple routine keeps it in good shape in the meantime:
- Daily: wipe the faucets and drip tray, and empty the drip tray so water does not sit and collect.
- Weekly: wipe the exterior and faucet handles with a mild dish soap solution, and check for any leaks or drips.
- Monthly: clean the drip tray and the area where the bottle sits, and clear any dust from the condenser at the back of the cooler.
- Every few months: run the full vinegar sanitization above, especially if you notice any change in taste.
- Once a year: schedule a full professional cleaning and sanitization with DrinkMore using the form above.
Request Form
We would love to hear from you! Please fill out this form and we will get in touch with you shortly.


